EIA PUBLICATION No

EIA

ENGINEERING

PUBLICATION

INTERNATIONAL AND NATIONAL QUALITY STANDARDS INDEX

EIA-765

May, 1998

___________________________________________

ELECTRONIC INDUSTRIES ALLIANCE

ENGINEERING DEPARTMENT

NOTICE

EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchasers in selecting and obtaining with minimum delay the proper product for their particular needs. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of EIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than EIA members, whether the standard is to be used either domestically or internationally.

Standards and Publications are adopted by EIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication.

Technical Publications are distinguished from EIA Standards or Interim standards in that they contain a compilation of engineering data or information useful to the technical community and represent approaches to good engineering practices that are suggested by the formulating committee.

This Publication is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating committee to be considered for inclusion in future revisions of this publication are encouraged to do so. It is the intention of the formulating committee to revise and update this publication from time to time as may be occasioned by changes in technology, industry practice, or government regulations, or for other appropriate reasons.

(From Project No. 4163, formulated under the cognizance of the Quality and Reliability Engineering (QRE) Standards Subcommittee.)

Published by

8ELECTRONIC INDUSTRIES ASSOCIATION 1998

Engineering Department

2500 Wilson Boulevard

Arlington, VA 22201

PRICE: Please refer to the current

Catalog of EIA, JEDEC, and TIA STANDARDS and ENGINEERING PUBLICATIONS

or call Global Engineering Documents, USA and Canada (1-800-854-7179)

International (303-397-7956)

Printed in U.S.A.

INTERNATIONAL AND NATIONAL

QUALITY STANDARDS INDEX

PREFACE

The material contained in this publication was compiled under the cognizance of the EIA Quality & Reliability Standards Subcommittee and approved under EIA Ballot PN-4163.

Purpose and Scope:

The index is presented to provide a quick reference of international and national quality standards and publications that support general quality system elements. This reference is a list of quality standards a company may wish to consider when implementing or improving their quality system.

Titles and document numbers are provided and sorted into the following categories:

[1] Quality System (System, Audits, Assessment, Certification)

[2] Quality Planning

[3] Process Improvement (Measurement Analysis, Process Modeling, Process Characterization, etc.)

[4] Process Control (SPC)

[5] Statistics & Sampling (DOE, Sampling Plans, etc.)

[6] Corrective Action

[7] Calibration

[8] Systems Engineering

[9] Design Control (Design Methodology & Guidelines)

[10] Software Control (Software Methodology & Guidelines)

[11] Reliability (Failure Analysis)

[12] Inspection & Test (Test Procedures & Methods)

[13] Packaging/Handling

[14] Configuration Management

[15] Supplier Quality (Procurement Quality & Supplier Management)

[16] Technology Specific (Standards & Guidelines)

Annex A: HOW TO ACCESS AND ORDER STANDARDS CONTAINED WITHIN THIS INDEX

Annex B: ACCESSING THIS INDEX VIA THE INTERNET

Annex C: HOW TO SUBMIT CHANGES

INDEX SORT BY QUALITY CATEGORY

*Category*	Title	Standard

Quality System Assessment & Certification	National Electronic Process Certification Standard	ANSI/EIA-599
	Quality System Assessment	ANSI/EIA-670
	Assessment Guide for Process Certification	ANSI/EIA-681
	Electronic components. Specification structures for quality assessment (Qualification approval and capability approval)	IEC Guide 102
	Basic Rules of the IEC Quality Assessment System for Electronic Components (IECQ)	IECQ 1001
	Rules of Procedure of the IEC Quality Assessment System for Electronic Components (IECQ)	IECQ 1002
	IEC Quality Assessment System for Electronic Components (IECQ)- Specifications List information current to 1997-06	IECQ 1004
	Integrated circuits - Part 1: Procedures for manufacturing line approval and quality management	IEC 1739
	Quality - Vocabulary Trilingual Edition	ISO 8402
	Quality Management and quality assurance standards - Part 1: Guidelines for selection and use	ISO 9000-1
	Quality systems - Model for quality assurance in design/ development, production, installation, and servicing	ISO 9001
	Quality systems - Model for quality assurance in production and installation	ISO 9002
	Quality systems - model for quality assurance in final inspection and test	ISO 9003
	Quality management and quality system elements - Part 1: Guidelines	ISO 9004-1
	Quality management and quality system elements - Part 2: Guidelines for services	ISO 9004-2

*Category*	Title	Standard

	Quality management and quality system elements - Part 4: Guidelines for quality improvement	ISO 9004-4
	Guidelines for auditing quality systems – Part 2: Qualification criteria for quality systems auditors	ISO 10011-2
	Guidelines for developing quality manuals	ISO 10013
	Understanding the Environmental Standards	ISO 14000
	An approach to the review by a certification body of its own internal quality system	ISO/IEC Guide 56
	Semiconductor Devices, General Specification for	Mil-PRF-19500
	Hybrid Microcircuits	Mil-PRF-38534
	Integrated Circuits (Microcircuits) Manufacturing	Mil-PRF-38535

Quality Planning	Live working - Guidelines for quality assurance plans	IEC 1318
	Quality management - Guidelines for quality plans	ISO 10005

Process Improvement	Guideline for Process Characterization	JEP-132

Process Control	Guide For Quality Control Charts	ANSI/ASQC B1
	Control Chart Method of Analyzing Data	ANSI/ASQC B2
	Control Chart Method of Controlling Quality During Production	ANSI/ASQC B3
	Statistical Process Control Systems	ANSI/EIA-557
	Failure Mechanism-Driven Reliability Monitoring	ANSI/EIA-659
	Guideline on the Use and Application of Cpk	EIA-738
	Guidelines for User Notification of Product/Process Changes by Semiconductor Suppliers	JESD46
Statistics & Sampling	Statistics – Vocabulary and Symbols – Probability and General Statistical Terms	ANSI/ISO/ASQC A3534-1
	Statistics – Vocabulary and Symbols – Statistical Quality Control	ANSI/ISO/ASQC A3534-2
Category	Title	Standard

	Sampling Procedures and Tables for Inspection by Attributes	ANSI/ASQC Z1.4
	Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming	ANSI/ASQC Z1.9
	Assessment of Average Outgoing Levels in Parts per Million (PPM)	ANSI/EIA-554-1
	Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Levels (SQL) in Parts per Million (PPM)	ANSI/EIA-555
	Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process	ANSI/EIA-584
	Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots	ANSI/EIA-585
	Assessment of Quality Levels in PPM Using Variables Test Data	ANSI/EIA-591
	Statistics – Vocabulary and symbols – Part 3: Design of experiments	ANSI/ISO/ASQC A3534-3

Corrective Action	Component Problem Analysis and Corrective Action Requirements	ANSI/EIA-671

Calibration	Calibration Laboratories and Measuring and Test Equipment - General Requirements	ANSI/NCSL Z540-1
	Terms and definitions used in connection with reference materials	ISO Guide 30
	Contents of certificates of reference materials	ISO Guide 31
	Calibration in analytical chemistry and use of certified reference materials	ISO Guide 32
	Uses of Certified Reference materials	ISO Guide 33
	Quality system guidelines for the production of reference materials	ISO Guide 34
	Certification of reference materials - General and statistical principles	ISO Guide 35
	Accuracy (trueness and precision) of measurement methods and results – Part 1: General principles and definitions	ISO 5725-1
Category	Title	Standard

Calibration	Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method	ISO 5725-2
	Accuracy (trueness and precision) of measurement methods and results – Part 3: Intermediate measures of the precision of a standard measurement method	ISO 5725-3
	Accuracy (trueness and precision) of measurement methods and results – Part 4: Basic methods for the determination of the trueness of a standard measurement method	ISO 5725-4
	Accuracy (trueness and precision) of measurement methods and results – Part 6: Use in practice of accuracy values	ISO 5725-6
	Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system for measuring equipment	ISO 10012-1
	General requirements for the competence of calibration and testing laboratories	ISO/IEC Guide 25

Design Guidelines	Formal Design Review	IEC 1160
	Design for Testability Guidelines	JESD 12-5

Systems Engineering	Systems Engineering	EIA/IS-632

Software Guidelines	Quality Assurance Requirements for Software Processes	CRB2
	Industry Implementation of International Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes	IEEE/EIA 12207
	Standard for Information Technology - Software Life Cycle Processes	ISO/IEC 12207

Failures & Reliability	Failure-Mechanism-Driven Reliability Monitoring	EIA-659
	Stress-Test-Driven Qualification of Integrated Circuits	EIA/JESD-47
Category	Title	Standard

	Dependability management – Part 1: Dependability programme management	IEC Pub 300-1
	Programmes for Reliability Growth	IEC 1014
	Fault Tree Analysis (FTA)	IEC 1025
	Analysis techniques for dependability – Reliability block diagram method	IEC 1078
	Reliability testing – Compliance test plans for success ratio	IEC 1123
	Reliability growth - Statistical test and estimation methods	IEC 1164
	Potential Failure Mode and Effects Analysis in Design (Design FMEA) and Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA) Reference Manual	SAEJ1739

Inspection & Test	Guidelines for MIL-STD-883 Screening and QCI Optimization	JEP-121
	Requirements for Soldered Electrical and Electronic Assemblies	J-STD-001
	Guide for the inclusion of lot-by-lot and periodic inspection procedures in specifications for electronic components (or parts)	IEC 419
	Test Methods for Electronic and Electrical Component Parts	Mil-Std-202
	Test Methods for Semiconductor Devices	Mil-Std-750
	Test Methods and Procedures for Microelectronics	Mil-Std-883

Packaging/Handling	Packaging Material Standards for ESD Sensitive Items	EIA-541
	Requirements for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices	EIA-625
	Electrostatics – Part 4: Standard test methods for specific applications – Section 1: Electrostatic behavior of floor coverings and installed floors	IEC 1340
Category	Title	Standard

Configuration Mgt.	National Consensus Std for Configuration Management	EIA/IS-649
	Quality Management – Guidelines for Configuration Management	ANSI/ISO/ASQC 10007

Supplier Quality	An approach to the utilization of a supplier’s quality system in third party product certification	ISO/IEC Guide 53

Environment, Safety & Health	Understanding the Environmental Standards	ISO 14000

Technology Specific	Integrated circuits - Part 1: Procedures for manufacturing line approval and quality management	IEC 1739
	Semiconductor Devices, General Specification for	Mil-PRF-19500
	Hybrid Microcircuits	Mil-PRF-38534
	Integrated Circuits (Microcircuits) Manufacturing	Mil-PRF-38535

ANNEX A

HOW TO ACCESS AND ORDER STANDARDS CONTAINED WITHIN THIS INDEX

ASQ

Wanda Jones, Coordinator, ASQ Sales

E-mail: wjones@asq.org
Telephone: 800-248-1946 (USA, Canada, and Mexico) or 414-272-8575
Fax: 414-272-1734

Department of Defense Index of Specifications & Standards

Defense Automated Printing Services

700 Robins Ave., Bldg. 41D

Philadelphia, PA 19111-5094

Attn: DoDSSP

EIA, IECQ and JEDEC

Global Engineering Documents
15 Inverness Way East
Englewood, COLORADO, 80112, USA
E-mail: global@ihs.com
Phone:+1-800-854-7179 Fax:+1-303-397-2740

IEC

1, rue de Varembé
PO Box 131
CH-1211 Genève 20
Switzerland

Telephone: + 41 22 919 02 11
Telefax: + 41 22 919 03 00

E-mail: infor@iec.ch

ISO

1, rue de Varembé
Case postale 56
CH-1211 Genève 20
Switzerland

Telephone: + 41 22 749 01 11
Telefax: + 41 22 733 34 30
Telex: 41 22 05 iso ch
Telegram: isorganiz
E-mail: central@iso.ch

ANNEX B

ACCESSING THIS INDEX VIA THE INTERNET

An electronic version of this index is available for viewing and download via the internet at the EIA web site. The URL address is:

http://www.eiafoundation.org/eng/comm/qre/qltymat.htm

Questions or comments may be directed to qre@eia.org

ANNEX C

HOW TO SUBMIT CHANGES.

The following form may be used to forward recommendations of changes to this standard including the addition or deletion of standards listed in the index.

NAME:

ADDRESS:

EMAIL :

PHONE :

FAX: ___________________________________________________

COMMENTS/CHANGES: